Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.     

利用视加速度补偿和推力逐级释放的垂直着陆制导方法

针对运载火箭子级垂直返回着陆段的制导问题，本文在应用凸优化的滚动时域在线规划基础上研究了制导鲁棒性的改善策略。为应对着陆后期控制能力不足的情况，在滚动规划过程中引入了推力上界逐级释放的策略。同时，考虑缓解干扰和误差累积的影响，在制导周期内引入视加速度信息对在线规划的推力指令进行补偿，以进一步改善滚动规划的递归可行性。最后，通过数值算例仿真及对比分析验证所提出的补偿策略的有效性。     

Formation flying reconfiguration manoeuvres via environmental forces in highly elliptical orbits

A study on reconfiguration manoevres applied to a tetrahedral formation in highly elliptical orbits is proposed, by using a propellantless solution. The manoeuvring strategy consists in exploiting certain environmental forces, specifically those provided by solar radiation pressure and atmospheric drag, by actively controlling the satellites’ attitudes. Through inverse dynamics particle swarm optimization the optimal attitudes required for the manoeuvres are evaluated, whereas the configuration’s evolution is simulated by a high-fidelity orbital simulator. The goal of the reconfiguration problem is to find an optimal control in order for the four spacecraft to reach a desired configuration in a specified portion of orbit, where the desired configuration is evaluated by a shape and size geometric parameter. By increasing the manoeuvring time and the satellites’ area to mass ratio, all the case studies considered are successfully verified.     

Contingency target assessment,trajectory design,and analysis for NASA’s NEA scout solar sail mission

The presented study examines contingency target selection and trajectory design for NASA’s Near-Earth Asteroid Scout mission under the assumption of a missed lunar gravity assist. Two previously considered asteroids are selected as potential targets for the given scenario based on favorable orbital characteristics for launch dates ranging from June 27, 2020 through July 26, 2020. Initially, a simplified circular restricted 3-body problem + ideal solar sail model is utilized to survey trajectory options for a month-long launch window. Selected solutions from this data set are then converged in an N-body ephemeris + non-ideal sail model. Results suggest that NEA Scout can still perform asteroid rendezvous mission under the missed lunar gravity assist scenario with new targets, 2019 GF1, 2018 PK21, and 2007 UN12, based on the target launch dates. Further target assessment is carried out for 165 days beyond the current June 27, 2020 launch date.     

多等级区域侦察弹性星座设计方法

针对传统侦察星座目标单一、弹性低的问题，提出了多等级区域侦察弹性星座的设计方法。该方法将星座设计过程按区域等级信息分为多个子星座逐步设计，直到整体星座对所有的区域性能满足设计要求。以区域被划分为3个等级为例，首先对星座设计需求、设计指标及设计步骤进行了分析。其次推导了地面最低分辨率和轨道高度的关系并确定了不同子星座的轨道高度。最后考虑轨道倾角、一箭多星发射、光照和升交点漂移同步约束，构建基础星座、子星座1和子星座2的优化模型。最终设计星座为3层混合星座，共8个轨道面和70颗卫星，星座对各等级区域的最大重访时间分别为10937s，12241s和17437s，弹性指数为2213%，2420%和6361%。结果表明该方法设计的星座可实现对区域覆盖和弹性分级的设计要求，证明了方法的有效性。对比Walker星座设计方法，在同等设计要求下，Walker星座所需卫星数为156颗，多等级区域侦察弹性星座所需卫星数远低于Walker星座，结果进一步证明了该星座设计方法的优越性。     

基于区间灰色不确定语言的工作类型优化方法

针对飞机维修任务工作类型优化过程中的模糊与灰色问题,采用区间灰色不确定语言变量建立工作类型的评价指标和决策模型,提出了军机维修任务工作类型优化方法。对优化方法进行了实例分析,工作类型排序结果和数据对比结果验证了优化方法的可行性与有效性。在某军机上对优化方法进行了工程应用,完成192项初始维修任务工作类型优化,应用结果表明了该优化方法具备良好的工程应用价值,可有效提升工作类型合理性。     

基于自适应非结构嵌套网格的旋翼流场模拟

针对直升机旋翼CFD仿真的复杂性,提出了改进的适合于格心格式求解器的非结构嵌套网格算法。采用自适应网格技术在旋翼流场仿真的整个过程中进行网格的自适应加密和疏化操作,以更好地捕捉桨尖涡等流动细节。对于频繁的自适应过程中产生的大量重复点和无用点,采用了高效的交替数字树算法(Alternating digital tree,ADT)和标记-删除-移动算法(Mark,delete,move,MDM)进行删除,节约了不必要的存储。针对格心格式的求解器,采用了基于梯度的网格间插值方式,简化了网格间数值传递的复杂性,同时不降低求解器的精度。对CaradonnaTung旋翼悬停算例和HLISHAPE 7A旋翼悬停算例进行了模拟验证,计算值与实验值吻合,表明本文建立的方法具有良好的鲁棒性和有效性。最后,与未采用自适应时求解器对桨尖涡的捕捉效果进行了对比,结果表明本文所采用的方法可以明显地提高求解器对桨尖涡的捕捉。     

基于6σ设计的复合推力高速直升机总体参数多目标优化

针对复合推力高速直升机总体设计阶段总体参数的选择问题,提出一种提高可靠性和鲁棒性的基于6σ设计的改进多目标遗传算法优化方法。采用叶素理论和数值积分的方法分析计算了复合推力高速直升机气动及飞行性能,并以此为基础建立了约束函数和初步目标函数模型;将6σ设计融入改进的多目标遗传算法中,构造最终目标函数;在给定有效载荷设计要求下,对复合推力高速直升机总体参数进行了多目标优化设计。该方法获得了所需的Pareto解,优化后的复合推力高速直升机飞行性能相对原机有了较大改善,算例结果表明该方法有效可行。     

基于概率的运载火箭控制系统设计方法研究

针对传统的控制系统极限偏差设计方法导致运载火箭余量大、总体性能下降的问题,综述了基于概率的控制系统设计方法的国内外研究现状,论述了运载火箭控制系统概率设计的基本思想及设计流程,基于概率密度函数建模理论,建立了通过实际控制指令来控制概率密度函数拟合权值的状态空间,并基于最小二乘方法对状态空间中的参数进行了辨识,进而建立了密度函数成型控制模型,提出了基于最优控制理论的运载火箭控制器设计方法,最后通过仿真验证了理论方法的有效性,为我国运载火箭控制系统的精细化设计提供了理论依据。     

一种基于VPL 的元器件快速建模方法

为了更好地落实航空电子模块的可制造性设计审查工作,结合航空电子模块产品特点和技术要求,建设了基于Valor软件的PCB/PCBA设计与检测自动化分析系统.元器件模型库作为该系统的必要组成部分,其覆盖范围和数据精度对审查结果至关重要.本文将从元器件模型库建设必要性、建设过程和建模工艺要求三个方面进行阐述,并提出一种基于Valor VPL的元器件快速建模方法,应用结果表明,该方法能够高效构建满足系统审查精度的元器件模型,使大规模元器件模型库的建设成为可能.